Practical Towel Installation Guide

From curuf filth, etc. substances that can be found in plumbing pipes
by cleaning, the water flow that will come into the towel becomes continuous
it should be brought.

Your towel installation as shown in figure-1
according to the pipes, put it in a straight position and water
make sure it is flat with no terrace.

A total of 3 pieces of Decals from two suitable slices -1
with the help of a pencil, so that
make a markup.The marked noks are a
drill with the help of a drill and pack
nail the dubels (5) coming out of it.

Which comes out of the package to the crashed dubels
with the help of screws (6), place the console (4) on the wall
secure it.

Console inserts on fixed consoles (3)
insert it and fix it with a screw (8).

After fixing your towel, the console
they screw the holders (2) (7) your towel
tighten it so that it compresses.

Install the cover (1) of the console holders (2).

connect the purjör (9) to the number 3 location
do it. water entry-exit to places 1 and 2
make their connections.

NOTE: If there is any air left in the towel after installation, with the help of purger (9)
evacuate the air. Be careful during evacuation. Together with the air evacuation
hot water will come.